Hi Steve,
Good plan, for a Neotek. Unfortunately not an option with the Mackie under
discussion as the faders are mounted on the circuit board.
That said, I have some new P&G 3000 series 10k faders going for cheap if
anyone wants to do what Steve did with their Neotek.
Best
Ike
Ike Zimbel
Zimbel Audio Ltd
416-720-0887
www.zimbelaudio.com
Sent from my iPhone
On 2011-07-28, at 11:06 PM, Steve Antoniazzi <[email protected]> wrote:
> Just jumping in here I didn't read all of what's going on. Here's my
> experience I had the original duncan faders In my 24x8 series 1e. I replaced
> them with P&G and have noticed a great deal of response. The glide ratio is
> much better and the faders are obviously much smoother. The caps are a little
> fatter which I like better. If you have the money it's a definate upgrade. I
> remember that swapping them out is a very simple 3 pin molex connector. Also
> having the board be modular in my mind is the first hill to go up with out
> being modular it's really really difficult. Either way what ever the time and
> money these boards are well worth it. Good luck!
>
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message body.
If you have any difficulties, or questions --please send an email to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
