Hi Ike,
Thanks for the info......................so I can explain this to my
client; how much disassembly of the console would be required to replace
the faders? If I were to go in from the bottom, would that suffice OR
would I also have to remove all the knobs, etc. from the top to completely
remove the pc board? Yes, I know the P&Gs won't work............I'd likely
just use factory replacements. Thanks much!
Regards, Jim
At 11:19 PM 7/28/2011, you wrote:
Hi Steve,
Good plan, for a Neotek. Unfortunately not an option with the Mackie
under discussion as the faders are mounted on the circuit board.
That said, I have some new P&G 3000 series 10k faders going for
cheap if anyone wants to do what Steve did with their Neotek.
Best
Ike
Ike Zimbel
Zimbel Audio Ltd
416-720-0887
www.zimbelaudio.com
Sent from my iPhone
On 2011-07-28, at 11:06 PM, Steve Antoniazzi <[email protected]> wrote:
> Just jumping in here I didn't read all of what's going on. Here's
my experience I had the original duncan faders In my 24x8 series 1e. I
replaced them with P&G and have noticed a great deal of response. The
glide ratio is much better and the faders are obviously much smoother.
The caps are a little fatter which I like better. If you have the money
it's a definate upgrade. I remember that swapping them out is a very
simple 3 pin molex connector. Also having the board be modular in my mind
is the first hill to go up with out being modular it's really really
difficult. Either way what ever the time and money these boards are well
worth it. Good luck!
>
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
