To all who worte on Sat, 01 Apr 2000 20:04:42 +1300
about [netconnect] Re: (Fwd) Speed Increase
> > I get something someone once called 'modem over-run', where the data
> > arrives faster than my computer can write to disk and flush the buffers,
>
> That's not possible. For a HD to be slower than your serial port
> If you are using the Amiga serial port, what speed is your port set to?
I have an 030, with a hypercom1, the port is set to 115200, but the
type of figures I get are like these :-
TERMINATION REASON.......... LOCAL REQUEST
LAST TX rate................ 24000 BPS
HIGHEST TX rate............. 24000 BPS
LAST RX rate................ 42667 BPS
HIGHEST RX rate............. 44000 BPS
PROTOCOL.................... LAPM
COMPRESSION................. V42Bis
Line QUALITY................ 037
Rx LEVEL.................... 010
Highest Rx State............ 83
Highest TX State............ 87
EQM Sum..................... 00E6
Min Distance................ 0000
RBS Pattern................. 00
Rate Drop................... 00
Digital Loss................ 2000
Local Rtrn Count............ 00
Remote Rtrn Count........... 00
Neil wrote
> If you have too much other data running over the DMA bus, the serial
>port is unable totransfer the data from the serial port to disk (or RAM)
>fast enough. Running a 256 colour AGA screen is a good way of doing
>this.
I have a 128 colour AGA screen; I'm begining to wonder if it has
something to do with my 2b motherboard, but I thought that only arose
with 040/060.
I would still like to fetch the entire artical into memory and then
write it to disk, rather than have it written in dribs'n'drabs. The only
thing I have left to try are the 'chunks', but until I know what they
are and how they work, I'm leaving them alone.
Thank you for all the suggestions, anymore would be most welcome.
--
All the best
Jules
--
A1200 (Desktop; that is, open plan all over the desktop.)
68030+FPU+MMU@50mhz 2mb(chip) 32mb(fastish) 4.5gb(storage)
DOpus(5.82) OS3.5 MUI NC3 DPaint(5) PPaint(7.01) Ww(7.01)
--
No one wants to hear from my armpits
-- Bart Simpson
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
