Date: Mon, 07 Feb 2000 05:58:34 +2400
From: Rodrigo Santos <[EMAIL PROTECTED]>
Subject: Re: silencing the modem?
On 2000-02-06 [EMAIL PROTECTED] said:
>hi
Hi again,
>okay, now i do not use atz so would i still place a ^ between the
>string and the m0 command, or some other symbol?
If you don't use any init string, you just type atm0. If you use any init
string, after it put
^matm0
As previously written by me (and appropriately corrected by Walter) ^m must
be present between any at commands issued as such, i.e., if you give multiple at
commands on any init string, you must separate them by the ^M symbol,
which is translated as a carriage return to the modem. So, suppose you have
an init string such as
at^f
you now should have
at^f^matm0
If there's no init string, you should only put atm0.
Best wishes,
the modem understands as a carriage return.
after each at command you give to the modem
>Make your own kind of music!
>Karen Lewellen, [EMAIL PROTECTED]
>Net-Tamer V 1.11.2 - Test Drive
Rodrigo Santos - Loures, Portugal
E-Mail: [EMAIL PROTECTED]
Does your computer have a virus or is it just running Windows?...
********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************
