If that isn't a typo then, depending on the condition of you're bike that could be the total value of the bike! Sounds like they just didn't want to work on it. Sent via BlackBerry by AT&T
-----Original Message----- From: "Mr. Knight" <[email protected]> Sender: [email protected] Date: Sat, 2 Oct 2010 14:24:40 To: <[email protected]> Reply-To: [email protected] Subject: Re: [Nighthawk Lovers] Re: How to rebuild/clean carboratorsfor1985Nighthawk650 Just wondering how much they quoted you. A shop in Maryland told me $1000 for the 2 carbs on my 86 450 NH. On 10/2/10, Graham Rogers <[email protected]> wrote: > and what did the shop say was the problem? > > On Oct 1, 2010, at 10:06 PM, Rick Wilson wrote: > >> I appreciate all the advice I received. However, I ended up taking >> it to the shop for rebuilding all four carbs. After 25 years, I >> guess it is about time. >> >> On Fri, Oct 1, 2010 at 6:43 AM, Allen <[email protected]> wrote: >> Did you ever get it running right? >> >> On Sep 27, 11:24 pm, "Allen Thomas" <[email protected]> wrote: >> > Try backing out the fuel screws to richen the idle mixture. >> > Sent via BlackBerry by AT&T >> > >> > >> > >> > -----Original Message----- >> > From: Rick Wilson <[email protected]> >> > >> > Sender: [email protected] >> > Date: Mon, 27 Sep 2010 16:45:08 >> > To: <[email protected]> >> > Reply-To: [email protected] >> > Subject: Re: [Nighthawk Lovers] Re: How to rebuild/clean >> carboratorsfor1985Nighthawk >> > 650 >> > >> > I rebuilt the carbs. It runs fine, as long as the choke is on! >> What's up >> > with that? >> > >> > On Sat, Sep 25, 2010 at 4:52 PM, Allen Thomas >> <[email protected]> wrote: >> > >> > > I have a 1992 750NH I can pull the carbs re-jet them and put it >> back >> > > together in approx 1.5 hours. You remove the tank, remove the >> airbox bolts, >> > > loosen the band clamps on the carbs, slide the airbox rear ward >> then pull >> > > the carbs from the intake boots. Then slide the carbs out the >> left side and >> > > undo the throttle and choke cables. Installation is reverse >> order. 4 screws >> > > hold the slide assembly in and 4 screws hold the float bowl on. >> Hint get a >> > > ziplok bag for each carbs parts. Be careful both removing and >> installing the >> > > carb screws they strip easily. Don't get carb cleaner on the >> rubber parts if >> > > you can help it. Do a bench sync after re assembly. Put a >> little oil on the >> > > intake and airbox boots before re assembly, and a ratchet strap >> is helpful >> > > to push the carbs and airbox back in place. Use a hair drier to >> soften the >> > > rubber if really stiff. >> > > Sent via BlackBerry by AT&T >> > >> > > -----Original Message----- >> > > From: surfswab <[email protected]> >> > > Sender: [email protected] >> > > Date: Sat, 25 Sep 2010 14:47:06 >> > > To: Nighthawk Motorcycle Lovers! >> <[email protected]> >> > > Reply-To: [email protected] >> > > Subject: [Nighthawk Lovers] Re: How to rebuild/clean carborators >> > > for1985Nighthawk 650 >> > >> > > Yep. >> > >> > > I'm about to dive into this -- twice -- I have two sets of 750 >> carbs I >> > > need to do. Never done such before and need all the tips, >> tricks and >> > > homegrown advice I can gather. >> > >> > > Getting them out of the frame looks like a PIA knucklebuster to >> me. >> > >> > > -- >> > > You received this message because you are subscribed to the >> Google Groups >> > > "Nighthawk Motorcycle Lovers!" group. >> > > To post to this group, send email to >> [email protected]. >> > > To unsubscribe from this group, send email to >> > > [email protected]<nighthawk_lovers% >> 2Bunsubscrib [email protected]> >> > > . >> > > For more options, visit this group at >> > >http://groups.google.com/group/nighthawk_lovers?hl=en. >> > >> > > -- >> > > You received this message because you are subscribed to the >> Google Groups >> > > "Nighthawk Motorcycle Lovers!" group. >> > > To post to this group, send email to >> [email protected]. >> > > To unsubscribe from this group, send email to >> > > [email protected]<nighthawk_lovers% >> 2Bunsubscrib [email protected]> >> > > . >> > > For more options, visit this group at >> > >http://groups.google.com/group/nighthawk_lovers?hl=en. >> > >> > -- >> > You received this message because you are subscribed to the >> Google Groups "Nighthawk Motorcycle Lovers!" group. >> > To post to this group, send email to >> [email protected]. >> > To unsubscribe from this group, send email to nighthawk_lovers >> [email protected]. >> > For more options, visit this group athttp://groups.google.com/ >> group/nighthawk_lovers?hl=en.- Hide quoted text - >> > >> > - Show quoted text - >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to >> [email protected]. >> To unsubscribe from this group, send email to nighthawk_lovers >> [email protected]. >> For more options, visit this group at http://groups.google.com/ >> group/nighthawk_lovers?hl=en. >> >> >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to >> [email protected]. >> To unsubscribe from this group, send email to nighthawk_lovers >> [email protected]. >> For more options, visit this group at http://groups.google.com/ >> group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
