no power to any systems jman. though i can cycle the starter by bridging the starter realy so its got plenty of juice. i had battrey problems by using a pos battery from advance auto which they dont even support with a warantee but since i got a yuasa, never a problem with the battery anymore. you have to take the front end apart pretty much to get at the back of the fuse panel [especially for me cause i have sausage fingers] which i plan on doing as soon as it warms up a bit here. supposedly this weekend
________________________________ From: "[email protected]" <[email protected]> To: [email protected] Sent: Wednesday, January 23, 2013 2:32 PM Subject: Re: [Nighthawk Lovers] trouble with my poor 650 nighthawk So no power to any systems, probing the fuse panel you have no voltage? Also disconnect Ing switch plug and probe for + is it there? If you do have + at fuse I would probe say headlight socket ground should be green wires and see if it shows + battery voltage if so your chassis ground is the issue -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.
