Uni sells a recharge kit that is a spray. Mine is like 4 years old and still has 1/2 a can left. I use it on the lawn equipment as well as the bikes. Graham is right, just damp with the oil.
Allen Thomas On Oct 2, 2015 11:45 PM, "Graham Rogers" <[email protected]> wrote: > I think you might be being a little too particular. I just get what oil I > can get into it, kind of 'squeeze' it out by dabbing it with paper towels I > and let it go at that. If its dripping out then there's too much in it. > Let as much out as drips out. The idea is for dust particles to stick to > the foam rather than pass through. As long as the filter is sticky with > oil, it will do its job. > > On Oct 2, 2015, at 8:15 PM, Alexander Press wrote: > > > Kiwin, I got my "No Toil" foam filter oil in the mail today and i worked > the green oil through the filter. It says to "squeeze" the excess oil out. > Well, my uni filter has a mesh grill running between two pieces of foam. > Can't squeeze. So I rubbed the oil into the outside of the filter real > good. Then did the same to the inside though probably wasn't as through, I > soaked the inside real good with a lot of oil to compensate. It seems like > now, most of the oil is trying to drop out so I keep turning the filter > hoping the moisture will dry out of the oil soon so it'll stick. Am I doing > this right? I feel like a spray would be a lot easier. > > > > -- > > You received this message because you are subscribed to the Google > Groups "Nighthawk Motorcycle Lovers!" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > To post to this group, send email to [email protected]. > > Visit this group at http://groups.google.com/group/nighthawk_lovers. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
