EN500 Update, bike runs excellent but I have another issue. It seems moisture is getting in the oil. I have run the bike twice now for 10 miles on the road and both times there seems to be a slight amount of h2o in the oil. The drained oil looks almost just dirty with traces of a milky looking mix. I have changed the oil 4 times with the same result. Running the bike on the stand, rather than on the road (when it was too cold) did not produce the cloudy oil as seen through the sight glass, perhaps because of no load or whatever. My question is besides a leak from the cooling system, is there any other way moisture could be getting into the oil. It’s such a small amount and there doesn’t seem to be any drop in the radiator fluid level. I’ll next give it a compression test to check for a broken head gasket. I want to know however if there is any other way moisture could be getting into the engine, people?? Graham
-- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
