On 3/18/07, Timothy Normand Miller <[EMAIL PROTECTED]> wrote:
> 1) a white background for the board picture would give a much more
> "professional" feel (see http://en.wikipedia.org/wiki/Open_Graphics_Project)
I tried to mess with it in GIMP, but I have neither the proper tools
nor the proper skill. I put another copy of that image (extracted
from the ODT file) here, so someone else might take a crack at it:
http://www.traversaltech.com/ogd1_press/ogd1_photo.png
Ok, I initially didn't intend to do this, I just was curious about how
well GIMP's selection tools would work for this sort of thing, since
the last time I trimmed a photo, it was in MS Paint (don't ask me why
I used to subject myself to that), but then once I got started, I
couldn't help but finish it. I didn't do the holes, since they were in
varying sizes, and it was hard to do them all well. I made the
background transparent instead of white, but it should be easy to
change if needed. If you take any more pictures of it, I beg of you to
take them on a background that isn't the same color as the PCB :)
http://www.eng.uwaterloo.ca/~sruggier/files/forums/ogd1_photo.png
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
