I tried the same setting with switching the hard drive to system 2 and i still get the same result. It detects only one logical volume. There is some setting which i'm obviously missing out. Experts, please help.
On Thu, Apr 16, 2009 at 11:48 AM, sundar mahadevan <sundarmahadeva...@gmail.com> wrote: > Could someone enlighten me on this question please: > Do i have to install iscsitarget on system 1 and access it with > open-iscsi(iscsi initiator) from system 2 or > can i have open-iscsi installed on both system 1 and system 2 and get > it working? > > On Thu, Apr 16, 2009 at 10:51 AM, sundar mahadevan > <sundarmahadeva...@gmail.com> wrote: >> kernel: 2.6.27-11 >> >> IET is your target. >> To my understanding IET is iscsi enterprise target which is similar to >> open-iscsi in implementing iscsi targets. open-iscsi and IET are >> different organisations implementing iscsi. Am i right? >> >> >> >> On Thu, Apr 16, 2009 at 10:46 AM, Mike Christie <micha...@cs.wisc.edu> wrote: >>> >>> sundar mahadevan wrote: >>>>> Are you building the open-iscsi tools or are they part of the distro you >>>>> are using? >>>> >>>>> I just used apt-get install open-iscsi on both systems. >>>> >>> >>> What kernel are you using (uname -a)? >>> >>>>> Are you also using qla4xxx or just using iscsi_tcp? >>>>> >>>> I dont think i use qla4xxx. I think i use iscsi_tcp. >>>> >>>>> If you are building your own tools make sure if you are using a 64 bit >>>>> kernel then the tools are also compiled as 64 bits. >>>>> >>>> I'm on a 32 bit system. In that case what is a 64 bit of use to me. >>>> >>>>> Make sure that you only have one set of tools installed. Do a whereis >>>>> iscsid and whereis iscsiadm. >>>> >>>> whereis iscsid >>>> iscsid: /sbin/iscsid /usr/share/man/man8/iscsid.8.gz >>>> whereis iscsiadm >>>> iscsiadm: /sbin/iscsiadm /usr/share/man/man8/iscsiadm.8.gz >>>> >>>> You are using IET right? If so it does not matter what disks you use. >>>> IET can handle it. >>>> >>>> No i dont use IET. I use open-iscsi on both systems. >>> >>> IET is your target. >>> >>> >>> >>> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
