what about to put it on github/gitlab?
On Wed, Jan 10, 2018 at 01:48:43PM +0000, James Murray wrote: > Antoine, > The work I did wasn't finished enough to release it, but it did work > (just about) well enough that I was able to use it myself. > > I updated it to the current version of OpenOCD and could send you a > patch if you want? > > I was able to find enough information to figure out how the JTAG/OnCE > interface works from the various Freescale docs and the PowerPC > reference materials. > I wrote functions to switch the TAP connection and IR length. > > When I started on the MPC5746R, I hacked the TRKMPC5643M eval board to > expose the P&E JTAG and hooked that up directly. I'm still using that > now with the supplied P&E drivers. However... given how long it took me > to get the 56xx device working in OpenOCD and the comparative low cost > ($300 ish) of a new P&E JTAG probe, I decided that my time was better > spent on application development instead of OpenOCD (unfortunately.) > > regards > > James > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > OpenOCD-devel mailing list > OpenOCD-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openocd-devel
signature.asc
Description: PGP signature
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
