ok, so I've put the server in my router's DMZ, and I can HTTP to all the ports I need (8002 and 9000) and get the hippo page.
I've put the modem's external IP address in regions under external ip, and the internal ip in the grid-common.ini now I get thos error in the robust console when trying to connect: 13:08:08 - [WEB UTIL]: <0> osd request for http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, method POST FAILED: Error: ConnectFailure (Connection refused) On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: > you know what thats my thinking you and maby us are overcomplicating the > whole thing**** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Gary Beck > *Sent:* Sunday, August 21, 2011 6:14 PM > > *To:* [email protected] > *Subject:* Re: [Opensim-users] Awaiting region handshake**** > > ** ** > > If you don't require LAN access then NAT Loopback isn't needed.**** > > ----- Original Message ----- **** > > *From:* Guardian <[email protected]> **** > > *To:* [email protected] **** > > *Sent:* Sunday, August 21, 2011 7:43 PM**** > > *Subject:* Re: [Opensim-users] Awaiting region handshake**** > > ** ** > > Hi again all,**** > > **** > > I'm really struggling to find a router in NZ that supports NAT Loopback... > I spent over an hour with Linksys and they pretty much said none of their > routers support it apart from the E2000 which can't be connected to any NZ > ISP's...**** > > **** > > I was just looking at the opensim wiki again, and notice it now says:**** > > **** > > "This is an issue since each region has to be specify an IP address for the > client to connect. This is the ExternalHostName parameter in a regions > config file (e.g. bin/Regions/Regions.ini). In the absence of NAT loopback, > if a forward facing IP address is specified (such as 199.149.252.44) then > external clients will be able to connect to the region but clients on your > local network will not. If the internal address were put in ExternalHostName > instead (e.g. 192.168.2.40) then viewers on the local network will be able > to connect but viewers from an external network would not."**** > > **** > > My Issue was I couldnt connect to the sim from outside even when the > external IP address was specified in regions.**** > > **** > > I don't need to connect to the sim from the LAN, only the WAN so is NAT > loopback still an issue?**** > > > _______________________________________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/opensim-users > >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
