Any Ideas guys? On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> wrote:
> ok, so I've put the server in my router's DMZ, and I can HTTP to all the > ports I need (8002 and 9000) and get the hippo page. > > I've put the modem's external IP address in regions under external ip, and > the internal ip in the grid-common.ini > > now I get thos error in the robust console when trying to connect: > > 13:08:08 - [WEB UTIL]: <0> osd request for > http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, > method POST FAILED: Error: ConnectFailure (Connection refused) > > > > On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: > >> you know what thats my thinking you and maby us are overcomplicating the >> whole thing**** >> >> ** ** >> >> ** ** >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Gary Beck >> *Sent:* Sunday, August 21, 2011 6:14 PM >> >> *To:* [email protected] >> *Subject:* Re: [Opensim-users] Awaiting region handshake**** >> >> ** ** >> >> If you don't require LAN access then NAT Loopback isn't needed.**** >> >> ----- Original Message ----- **** >> >> *From:* Guardian <[email protected]> **** >> >> *To:* [email protected] **** >> >> *Sent:* Sunday, August 21, 2011 7:43 PM**** >> >> *Subject:* Re: [Opensim-users] Awaiting region handshake**** >> >> ** ** >> >> Hi again all,**** >> >> **** >> >> I'm really struggling to find a router in NZ that supports NAT Loopback... >> I spent over an hour with Linksys and they pretty much said none of their >> routers support it apart from the E2000 which can't be connected to any NZ >> ISP's...**** >> >> **** >> >> I was just looking at the opensim wiki again, and notice it now says:**** >> >> **** >> >> "This is an issue since each region has to be specify an IP address for >> the client to connect. This is the ExternalHostName parameter in a regions >> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT loopback, >> if a forward facing IP address is specified (such as 199.149.252.44) then >> external clients will be able to connect to the region but clients on your >> local network will not. If the internal address were put in ExternalHostName >> instead (e.g. 192.168.2.40) then viewers on the local network will be able >> to connect but viewers from an external network would not."**** >> >> **** >> >> My Issue was I couldnt connect to the sim from outside even when the >> external IP address was specified in regions.**** >> >> **** >> >> I don't need to connect to the sim from the LAN, only the WAN so is NAT >> loopback still an issue?**** >> >> >> _______________________________________________ >> Opensim-users mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/opensim-users >> >> >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
