Ok lets start with scratch go download the opensim version 7.1.1 not diva just the straight version
run the 32bit opensim start and follow the instructons you should be able to connect to opensim as localhost:9000 in your consol follow the set up instructions as to region and estate ect make sure that worked after that I'll help you set it up as you like TC Gary From: [email protected] [mailto:[email protected]] On Behalf Of Guardian Sent: Monday, August 22, 2011 8:08 PM To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake Any Ideas guys? On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> wrote: ok, so I've put the server in my router's DMZ, and I can HTTP to all the ports I need (8002 and 9000) and get the hippo page. I've put the modem's external IP address in regions under external ip, and the internal ip in the grid-common.ini now I get thos error in the robust console when trying to connect: 13:08:08 - [WEB UTIL]: <0> osd request for http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, method POST FAILED: Error: ConnectFailure (Connection refused) On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: you know what thats my thinking you and maby us are overcomplicating the whole thing From: [email protected] [mailto:[email protected]] On Behalf Of Gary Beck Sent: Sunday, August 21, 2011 6:14 PM To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake If you don't require LAN access then NAT Loopback isn't needed. ----- Original Message ----- From: Guardian <mailto:[email protected]> To: [email protected] Sent: Sunday, August 21, 2011 7:43 PM Subject: Re: [Opensim-users] Awaiting region handshake Hi again all, I'm really struggling to find a router in NZ that supports NAT Loopback... I spent over an hour with Linksys and they pretty much said none of their routers support it apart from the E2000 which can't be connected to any NZ ISP's... I was just looking at the opensim wiki again, and notice it now says: "This is an issue since each region has to be specify an IP address for the client to connect. This is the ExternalHostName parameter in a regions config file (e.g. bin/Regions/Regions.ini). In the absence of NAT loopback, if a forward facing IP address is specified (such as 199.149.252.44) then external clients will be able to connect to the region but clients on your local network will not. If the internal address were put in ExternalHostName instead (e.g. 192.168.2.40) then viewers on the local network will be able to connect but viewers from an external network would not." My Issue was I couldnt connect to the sim from outside even when the external IP address was specified in regions. I don't need to connect to the sim from the LAN, only the WAN so is NAT loopback still an issue? _______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
