Jo-Philipp Wich <[email protected]> wrote: > Typically only one of the ethernet ports will respond to pings in > failsafe mode, so try all. Its either LAN1, LAN4 or WAN - depending > on the hardware version. The 40+ WRT54GL v1.1 boxes that I manage listen on all 5 ports in failsafe mode, but I usually use port 1.
Aggelos Manousidis <[email protected]> wrote: > I think I tried that and it didn't respond even to ping of > 192.168.1.1. > I' ll try again and see. Should I try to connect (telnet) from one of > the four lan (ethernet) ports of the WRT54GL, or from the WAN > ethernet side? I just tried on a WRT54GL v1.1 that I have on my desk and I was able to ping/telnet from 192.168.1.100 (Centos desktop) to 192.168.1.1 (WRT54GL) via all 4 LAN ports as well as on the WAN port, but as Jo-Philipp says that may depend on the hardware version, so YMMV. Aaron Z _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
