Note, there was a fix for DS2409 Hubs after the latest relesase (2.7p0) in
the CVS. 2.7p1 should be released soon incorporating this fix and fixed
thermocouple calculations and fixed serial port setup.
Paul Alfille
On Dec 6, 2007 5:29 PM, decibels.drop <[EMAIL PROTECTED]> wrote:
> I might have this problem solved. At least on the box testing it on.
> Need to put it back on the original box and see. But it appears my
> problem was due to the way Hobby Boards Hub powers the
> devices on it's branches and they need to be in powered mode.
> Not parasitic.
>
> I had it powered, but something was wrong with the crimp on the
> RJ45 and was floating. Then tried in parasitic mode and that won't
> work with these Hubs apparantly. I got my 5v back to the DS18S20
> after recrimping the RJ45.
>
> Now I can read the DS18S20 thru the Hub.
>
> So this is a note for any of you running the Hobby Board Hub to
> power your devices.
>
> Thanks to Jon F. for that info.
>
> owread -F localhost:3000 1F.66BD04000000/aux/10.381755010800/temperature
> 64.175
>
>
> Dave
>
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
