I might have this problem solved. At least on the box testing it on.
Need to put it back on the original box and see. But it appears my
problem was due to the way Hobby Boards Hub powers the
devices on it's branches and they need to be in powered mode.
Not parasitic.
I had it powered, but something was wrong with the crimp on the
RJ45 and was floating. Then tried in parasitic mode and that won't
work with these Hubs apparantly. I got my 5v back to the DS18S20
after recrimping the RJ45.
Now I can read the DS18S20 thru the Hub.
So this is a note for any of you running the Hobby Board Hub to
power your devices.
Thanks to Jon F. for that info.
owread -F localhost:3000 1F.66BD04000000/aux/10.381755010800/temperature
64.175
Dave
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
