OK, I'm having this same problem. I have CW Lite I'm at the same point in
the tutorial.
First, is there anywhere in the documentation where these 'shortcuts' are
described?
When I press F5 in CW, I then start Find on the Palm and enter the 'shortcut
.. 2'.
It beeps and clears the line. When I press Enter in CW, Hotsync launches
automatically
on th ePalm and I get the BDWM message in CW. I did a soft reset on the
Palm and
managed to get the app to download once, but then Hotsync launches and I'm
still unable
to debug it from within CW. Is there anyway to disable HotSync completely?
Is there some documentation that would be helpful (and accurate) that might
answer some
these type of questions. So far, I'm very dissappointed at the inaccuracy
of the docs that
came with the CW Lite installation. I see several on the Palm site but with
very limited
knowledge of Palm and CW, I'm not sure where to begin. Any help would be
greatly
appreciated.
Keith
"Jun-Kiat Lam" <[EMAIL PROTECTED]> wrote in message
news:7359@palm-dev-forum...
>
> BTW the message bug has been fixed in the latest linker plugin, which is
> part of the Palm OS 3.5 SDK. If you download and install it, it will plug
> right into your CW installation.
>
> In this case it sounds like the 'shortcut dot dot 2' wasn't recognized
> correctly by the device, or the serial port is somehow busy. Make sure
that
> Hotsync is completely off, make sure that the serial port of the device is
> free (a soft reset will fix that), and try entering the 'shortcut dot dot
2'
> in the Find dialog. If entered correctly the line will disappear, and
there
> should be no up-arrow at the lower right. Also you may want to check that
> the debugger is actually targeting the correct COM port (in the Palm
> Connection Settings).
>
> Hope this helps.
>
> Rgds,
> Jun-Kiat Lam
> Metrowerks Technical Support
>
> ----- Original Message -----
> From: "Nick Torenvliet" <[EMAIL PROTECTED]>
> To: "Palm Developer Forum" <[EMAIL PROTECTED]>
> Sent: Thursday, April 06, 2000 11:47 AM
> Subject: Frist App, where(what) is BDWM?
>
>
> >
> > I am trying to debug my first palm app(see Palm OS tutorial pg. 37)
> >
> > I've pretty much followed the entire procedure(I think) I've gotten
> console
> > mode up etc.
> >
> > When I click OK to confrim console mode to the debugger I get the
> following
> > message:
> >
> > The de-bug helper app could not be found
> > The registry key 'BDWM' is not defined
> >
> > What do I need to do to get around this?
> >
> >
> >
> > --
> > For information on using the Palm Developer Forums, or to unsubscribe,
> please see http://www.palm.com/devzone/mailinglists.html
> >
>
>
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palm.com/devzone/mailinglists.html
