At 7:41 AM -0500 on 7/24/03, Frank J. Nagy wrote: >PowerMac 7600 with Sonnet G4/800Mhz CPU and 672MB RAM. >Adaptec 2930U SCSI card (external IBM 18GB drive has main >system on it) and ATI Radeon Mac 7000. > >Not a hardware problem by itself since I can boot 9.0.4 from a CD >with the Tempo Trio installed. I can also boot a CD with 9.1 BUT >none of the external SCSI devices are visible/mounted. > >>I just installed a Tempo 133 (not trio) and a maxtor 120 in my 8600. They >>work great. >>I did set a jumper on the drive. You might want to check that. > >I did that. The Maxtor works fine and was seen when I boot with >OS 9.0.4 from a CD. The problem is in 9.1 itself.
I'm using 9.1 with the Tempo 133 and maxtor in my 8600 so I know they can work together. I have an external SCSI CDRW attached as well. The Tempo card is seen by ASP as a SCSI card. SCSI Probe and ASP call it SCSI bus 2. I wonder if your Adaptec and the Tempo Trio are claiming the same bus. jim -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
