Fluxstringer wrote: > I'm not an electrical engineer and I hope any lister who is will > correct me and not laugh too hard, but here goes. > > Perhaps the size of the DIMMs is smaller than the card wants to see > for whatever it needs RAM for > And maybe the jump from DIMM to DIMM interrupts the process. Could > you try it with a Single larger DIMM ? > > Another possibility is a problem in the slot circuitry. A PCI mobo I > used to have had one slot that refused to perform with every card put > in it. It worked with some, but not all. Bad trace ? Bad solder > joint at a chip ? > > I don't know.
Are you smoking' the same thing the Apple designers are? I remove the 32 mb DIMM's by pairs (a6/b6, a5/b5, etc.) until I was down to 1 pair left, attempting to initialize after each one, with the same failure. I removed those, and put in 2 64 MB DIMM's in A6/B6, and tried it again. It worked. Did you get that? IT WORKED. What the [EMAIL PROTECTED] is going on? Other than this initialization issue, the 32 MB DIMM's have been fine. I am so confused, baffled, stumped, puzzled, perplexed, mystified, and bewildered! --> Russ -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
