Ok. Well, either way nada since I searched I never found it. The new mobo is the Asus P4C800-E Deluxe. I'll get into more detail on SATA Vs IDE and tests in a dedicated post when I've completed the tests since I'm sure some will be interested. In short, I'm benchmarking & testing the Raptor on the ICH5R controller, then on the Promise controller, (both configured as IDE since I only have one now), and comparing that to the Maxtor ATA133 80gb 7200rpm 8mb buffer, the Seagate of the same specs (except it's ATA100), along with the WD800JB also same specs as the Seagate. I've also done some extensive memory benchmarks at all settings. (That mobo has the Promise ATA133 RAID chip, and the Promise SATA RAID chip. Sort of like the IC7-G but with Promise instead of the Si3112A chip). I almost got the IC7-G. -Clint
God Bless Us All Clint Hamilton, Owner http://OrpheusComputing.com ) ----- Original Message ----- From: "Ben Moore" <[EMAIL PROTECTED]> If you have one, it ought to be in windows. I just looked on one of my systems and found one from back in July. It's a hex file by the way and you are probably not going to be able to make much sense of it. Stopping the auto reboot will at least let you look at the message. So how do you like serial ATA? I've got an Abit IC7-G with a pair of WD raptors. The bench marks are pretty amazing but I'm not sure I can really perceive any difference in speed. I love the small cables though. Ben Moore ----- Original Message ----- From: "OrpheusComputing.com" > Thanks Ben. If you mean right under C:, it's not there even > with 'show all files' and 'show system files enabled'. I > searched for *.dmp and the only file found was user.dmp and > that was unreadable in Notepad. I looked to see when it was > modified and strangely, it was MINUTES ago, while I was > searching. I searched for "memory" next and all I found from > that was .class files and I don't suppose it would be one of > them. > > This was not this PC, but a new one I'm setting up and I'm > testing it's limits. ;-) It's also had numerous HD's on it, > on the IDE and on the SATA connectors for testing. > -Clint ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
