Of course he had no issues using it on the LX. The LX is a pure K mount, no electronic communication going on there at all. I have had a problem with a cheap CPC, (Pentax made non multi-coated), TC with both my *ist-D and Ds. It used to work fine transmitting data to my MZ-3 and ZX-5n. Every other A/F/Fa lens I have works fine with the digital bodies but that damned TC just sits on them inertly. I've tried cleaning the contacts but there's no joy. I'm basically too lazy to get either of the MZ/ZX bodies working to test it since I have no interest in shooting film with them at the moment.
Fred Widall wrote: > I recently purchased a Pentax-A 1.4X-L TC and I'm having problems getting > it to communicate aperture settings to my K10D. > > When I attach my Pentax-A 400mm F5.6 to it, and mount them on my K10D the > display shows the aperure as 'F--'. I also have a cheap Sakar 1.4X TC and > when I use that the aperture setting is displayed correctly, so the issue > does seem to be with the Pentax TC, rather than the K10D mount or some > setting on the camera. > > Looking at the description of the Ka mount contacts on Bojidar Dimitrov's > site I see that aperture data is passed with the '*' designated pin. > > On my K10D mount this pin is slightly recessed. On the 'mount' side of my > Pentax-A 1.4X-L TC the contacts are not the usual small, > slightly-protruding, ball-bearing contacts, but rather little > indentations. > > I think the problem is that the recessed pin on the K10D is not connecting > with the indentation on the TC. My Sakar TC has the ball > bearings on the 'mount' side which is why it makes a connection and works > correctly. > > I've spoken with the person I bought it from and he had no issues with > using it on an LX. > > Hope my description makes sense ...... > > Anyone experienced a similar problem, and have a solution ?? > > I can use the Pentax-A 1.4X-L TC in manual mode so its not a major > problem, but it would be nice to get it working in 'A' mode. > > Thanks. > > Fred. > > -- Vote for Cthulhu. Why settle for a lesser evil... -- Dr. Jerry Pournelle -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
