--- Adam <[EMAIL PROTECTED]> wrote:
> My 3400's mouse button is starting to break. All of a sudden it only
> 'clicks' if pressed right in the middle, and mow has a stiff,
> undercooked
> feel which makes using it a pain. Once I find some info on how to do
> so, I
> plan on opening up the 3400 and taking a look to see if it's anything
> obvious. Any insight would be appreciated however.
> 
There are a couple of different places where the plastic breaks on the
clicker of the 3400. It can be reinfoced and glued with epoxy quite
satisfactorily if you are handy with that kind of thing.

To get the trackpad off, remove the keyboard (3 torx t-8 screws). Next
remove the single screw that secures the speaker grill, and flip it up
out of the way. Now open the screen wide open and remove the left and
right clutch covers (hinge covers). Now you can lift the trackpad. If
done correctly and carefully you will not break any plastic tabs. The
trackpad is slightly wedged in place (don't know any better way of
describing it) near where the right end of the space bar would be. A
bit of upward prying will free it.

Greg

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus � Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

-- 
PowerBooks is sponsored by <http://lowendmac.com/> and...

  Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
  -- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PowerBooks list info:   <http://lowendmac.com/lists/powerbooks.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to