Dave, We don't use the DT375 but we have had experience with monitoring non MGPI instruments with WRM equipment (e.g., AMS-4). In this instance we developed a Radnet protocol converter to take the information at the RS-232 output point to make it translate to a signal that the WRM2 software could talk to. If you are still having issues with this I would recommend contacting Jim Kost at MGP Instruments (Mirion) to help you with this issue.
Seth. From: [email protected] [mailto:[email protected]] On Behalf Of BREHM, DAVID M Sent: Tuesday, December 07, 2010 5:21 AM To: [email protected] Subject: Powernet: Ludlum Area Monitor on WRM2 I'm looking for anyone who has had success monitoring a Ludlum DT375 remotely using the MGPI WRM2 system. Of particular interest are any special WRM2 radio or serial cable configurations. Thanks, David Brehm Fort Calhoun Nuclear Station Supervisor - Radiological Equipment & Dosimetry Office: 402.533.7582 Cellular: 402.214.0107 Pager: 402.561.3310 This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
