thanks brad and stephen,

looks like i found the problem...  my tmod_main is a blank page
now.  guess i get to redo it and then try and associate it with the
pages i've already generated.

thanks again, miker  

> -----Original Message-----
> From: Brad Velander [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, August 13, 2001 10:27 AM
> To:   'Protel EDA Forum'
> Subject:      Re: [PEDA] multipage schematic question
> 
> Mike,
>       if your sheet symbols contain the correct file name for the
> associated subsheet then you have no problem. Simply right click somewhere
> in your Exlorer Pane, then click View, Refresh from the menus. This should
> rearrange the subsheets under the main top sheet. Typically if all the
> subsheets are correctly referenced by the top sheet, closing and then
> reopening the file will also accomplish this same function as it scans in
> the documents upon reopening.
> 
> Brad Velander,
> Lead PCB Designer,
> Norsat International Inc.,
> #300 - 4401 Still Creek Dr.,
> Burnaby, B.C., V5C 6G9.
> Tel. (604) 292-9089 direct
> Fax (604) 292-9010
> website www.norsat.com
> 
> 
> > -----Original Message-----
> > From: Robison Michael R CNIN [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, August 13, 2001 7:13 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: [PEDA] multipage schematic question
> > 
> > 
> > hello,
> > 
> > i've only done a couple multi-sheet schematics and its been a while.
> > the last few boards have been simple two-sided reworks of old boards
> > and i didn't do a schematic for them... just the pcb.
> > 
> > anyway, i created tmod_main.sch and put the sheet symbols for all
> > the pages and then went thru and created sheets from the symbols
> > and all looks well.
> > 
> > but what makes me nervous is that in the last multi-sheet schematic,
> > in the explorer window the sub-sheets appear as an expansion of the
> > main, whereas in my new one they are sitting on the same level as
> > the main.  i'm worried that they might not be properly associated to
> > the main.
> > 
> > any comments would be appreciated.
> > 
> > thank you, miker

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to