Wayne. Following Thomas' queries, try changing the colour of the pad holes and see (or not!) if this has an effect.
Protel changes the colour of things that have focus or are selected, and we have no or not much control over this colour. As I mentioned in my previous email, I have the default backround colour and have changed pad and via holes to black. When I move pads (and vias) the hole colour changes to a purple-ish colour. Maybe Protel is changing the hole colour (with your colour scheme) to the same as your background colour. HTH Brendon. ----- Original Message ----- From: "Wayne Trow" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Cc: "'Protel EDA Forum'" <[EMAIL PROTECTED]> Sent: Wednesday, November 14, 2001 3:43 PM Subject: Re: [PEDA] Holes > > All these emails - getting confused ;-0 > > OK... > > Im running P99SE with SP6 > > my system is an NT4 SP6 > > Nvidia TNT Model64 > > White holes, Black background, not in transparent mode > > Yes I use a 0,0 pad with variously sized holes. > > OK that should replace three emails Ive previously sent > > Thanks > > > Wayne > > > > > "Thomas" > <[EMAIL PROTECTED] To: "'Protel EDA Forum'" <[EMAIL PROTECTED]> > m.au> cc: > Subject: Re: [PEDA] Holes > 14/11/01 14:47 > Please respond > to "Protel EDA > Forum" > > > > > > > Nope. I can still see a 0mm x 0mm pad with 1mm hole when moving it. May be > something to do with the colour settings. > > What version and service pack are you using? (me = S99E SP6). > > > -----Original Message----- > > From: Brendon Slade [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, 14 November 2001 12:26 PM > > To: Protel EDA Forum > > Subject: Re: [PEDA] Holes > > > > > > Hi Wayne > > > > From memory this only happens when the copper pad diameter is > > less than > > (incl zero) the hole diameter, irrespective of whether it's > > PTH or not. > > > > Cheers > > Brendon. > > > > ----- Original Message ----- > > From: "Wayne Trow" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, November 14, 2001 1:47 PM > > Subject: [PEDA] Holes > > > > > > > Hi All > > > > > > We have mounting holes in our pcbs - amazingly enough :-) > > but when I > > > left-click-hold to move a hole it disappears leaving only > > the crosshairs. > > > > > > WHY OH WHY OH WHY ????? > > > > > > > > > Thanks for you help > > > > > > > > > Wayne Trow > > > PCB Design Technician > > > Gallagher Group LTD > > > Hamilton > > > New Zealand > > > > > > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
