Given what you need to do, you might try doing Edit | Export to spread, and edit in the spreadsheet view; this could be quicker, especially for those parts where there are only a few of each.
> -----Original Message----- > From: Bob Wolfe [mailto:[EMAIL PROTECTED]] > Sent: Thursday, January 03, 2002 11:18 AM ><snip> > > By that I mean you can globally update all the footprint names FROM > "conn,.1ctr,.025pin,vert,shrd" TO say "XYZ" , etc but you still need to do > that for each footprint type. On a large schematic that can still be a bit of work. > I admit it is easy for resistors, caps etc. the majority use the same > footprint 0603 etc. And those are not as much an issue to change. > Unless there is some other way to drive the global update or I am not using > it to its fullest, this is still seems way too much work for a large schematic. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
