yes you can beat AP
SMTH circuits
full spec - dbl sided, sldr mask, legend, fast, about $100
Clem Tang <[EMAIL PROTECTED]>
http://www.1pcb.com/
(also in Canada)

Dennis Saputelli


[EMAIL PROTECTED] wrote:
> 
> Hi Florian,
> I have used the Isolator software from T-Tech out of the US. It imports
> gerber files and drill files directly then generates its own isolation route
> files. It is very effective and easy to use, but not very fast. It's great
> for single sided test PCBs but I found it a bit of a pain for complex double
> sided. It seems to me that you can't beat the proto-1 service at AP
> Circuits. Just my opinion!
> www.apcircuits.com
> Cheers,
> 
> 
>                            GE Energy Services
> ______________________
> 
> Lloyd Good
> Development Digitization
> 
> Substation Automation Solutions
> GE Harris Energy Control Systems Canada, Inc.
> 2728 Hopewell Place N.E., Calgary, Alberta T1Y 7J7  CANADA
> Tel: 403.214.4777,  Dialcomm: 8.498.4777,  Fax: 403.287.7946
> Website: www.gepower.com/geharrisenergy/
> 
> NOTICE: The information contained in this e-mail is privileged, confidential
> and intended solely for the use of the addressee named above. If the reader
> of this e-mail is not the intended recipient, you are hereby notified that
> any dissemination, distribution or copying of this e-mail is strictly
> prohibited. If you have received this e-mail in error, please notify me
> immediately by telephone (collect) at (1) 403.214.4400 and destroy this
> e-mail as well as any copy. Thank you.
> 
> -----Original Message-----
> From: Florian Finsterbusch [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, February 28, 2002 8:45 AM
> To: Protel EDA Forum
> Subject: [PEDA] Software for Isolation Milling
> 

-- 
___________________________________________________________________________
www.integratedcontrolsinc.com            Integrated Controls, Inc.    
   tel: 415-647-0480                        2851 21st Street          
      fax: 415-647-3003                        San Francisco, CA 94110

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to