Hello Matt,
Make sure that your .bmp is in a known library location with your templates,
and when you insert it into your template file, insert it from that library
location.
If you have it in a 'project' directory for example, and open your design
from the 'recent edits' list, then Protel will not find the .bmp.
Sometimes if you open another design, in a directory that the .bmp is in,
then they will suddenly appear.......

regards,
Phil.

Phil Dutton C.I.D.
Senior CAD Technician
IPC Certified Interconnect Designer

Tenix Defence Pty Ltd 
Electronic Systems Division
Second Avenue, Technology Park,
Mawson Lakes.  SOUTH AUSTRALIA  5095

================================
Phone   (08) 8300 4400 (reception)
                (08) 8300 4481 (direct)
Fax             (08) 8349 7420
email           [EMAIL PROTECTED]
Internet Page   http//www.tenix.com
================================



-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 3 July 2002 11:36 AM
To: Protel EDA Forum
Subject: [PEDA] Images and Schematic Templates


I have added a bitmap image to the schematic template I normally use.
However, when I apply the template to an existing document, then reopen the
document, sometimes the image isn't there. Whether or not the image appears
seems to be pretty much a random event. Does anyone know of a remedy for
this?

Cheers,
Matthew van de Werken
Electronics Engineer
CSIRO Exploration & Mining - Gravity Group
1 Technology Court - Pullenvale - Qld - 4069
ph:  (07) 3327 4685     fax:  (07) 3327 4455
email:  [EMAIL PROTECTED]

************************************************************************
* Tracking #: BAF036FDA937A742932F213C4EBD744F37133143
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to