> I had that one once too.
> It turned out to be a not-so-obvious typo in the net and port names that
> prevented P99 top correctly link the nets up.

That still happens to me once in awhile.  1 thing I still wish for is a font
which better visually defines the difference between 0 & O.  Like the old
days of the zero with the slash through it.
_____________
Brian Guralnick


----- Original Message ----- 
From: "Leo Potjewijd" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Thursday, March 18, 2004 4:42 AM
Subject: Re: [PEDA] 99SE: 2 of every net name?


> At 18-03-2004 07:26, Laurie Biddulph wrote:
> >I have found this to be caused by the fact that my schematics do not
> >correctly link the nets across multiple pages. Check if your scope is set
> >to Ports & Net Labels and/or make sure your nets are clearly marked on
all
> >relevant pages. The overall block diagram using sheets is useful here as
well.
>
> I had that one once too.
> It turned out to be a not-so-obvious typo in the net and port names that
> prevented P99 top correctly link the nets up.
> Found it by checking the 'add sheetnumber to local nets' checkbox in the
> synchronizer....
>
>
> Leo Potjewijd
> hardware designer
> Integrated Engineering B.V.
>
> [EMAIL PROTECTED]
> +31 20 4620700
>
>
>



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to