Ron, Did you remember to arm the track? It's not going to just naturally let you hear it within Pro Tools, unless you have an audio track which is either armed or input monitor enabled.
Go look at chapter 5 of the PT Access guide. It will be very beneficial. All of this is covered. You do not need to create an aggrigate device to make this work. You can, but it isn't necessary. For what you're wanting, if you only just wanna monitor through PT, that would be a bit overkill. Chris. > On Mar 17, 2023, at 1:23 PM, Ronald Glaser <ronaldjglas...@gmail.com> wrote: > > Ok, from what I know i did set the amp to the recording source,within the > playback engine dialog, the amp is a boss Katana MK2 100 watt, protools > latest version mac mini all up to date. > I ssuspect that I will need to go into the audio/midi IO dialog and creat a > device and see if this can be unmuted, I could use the speaker in the amp but > I thought it would be more prefered to monitar with in protools itself. > > On 3/17/2023 1:08 PM, Steve Martin wrote: >> If you want to use the amp for input but monitor through your studio >> monitors, you will need to set the amp as the input device and the audio >> interface that the monitors are plugged into as your output device. I don’t >> remember if PT allows you to set a different input device and output device >> or if you will need to create an aggregate device to do this. However if you >> set your amp as the input and output device, you can just plug headphones >> into the amp (if it has a headphone jack) to monitor pro tools. Otherwise if >> the amp doesn’t have an headphone jack it will. Then probably all come out >> the amp’s speaker in which case I imagine headphones will sound better. >> >> >>> On Mar 17, 2023, at 6:51 AM, Ronald Glaser <ronaldjglas...@gmail.com> wrote: >>> >>> Ok I have a question for you all. >>> >>> I have a guitar amp that can connect via a usb cable to my mac, but what I >>> need to know is how to set up the routing when I connect this amp to my >>> mac, also when doing this. I do not hear any sound from my amp through my >>> monitar speakers, this happens not only I am going to think in PT but also >>> in other DAWS i have installed on the mac, how would I unmute the sound for >>> the amp? >>> >>> >>> >>> >>> Ron. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/83c5d84b-688c-8632-cf43-df4f9c44b83c%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/536084e5-a032-64d0-412a-0b1b223b91d0%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/1443CB1B-E392-47CF-A8F9-DE6A69987F38%40gmail.com.
