Op Tue, 23 Jan 2007 17:37:30 +0100 schreef Neil Riley <[EMAIL PROTECTED]>:
> Which is good but when i do dir cdr1_ i get 'Not implemented', which is > bad. > You need to set the location of the CD drive with the command: CDR_DRIVE 1,1,0 This sets cdr1_ (1,) to the slave of the 1st ide (,1,), and the 1st CD session (,0). Check the HDD for documentation on the Atapi_ & cdrom_bin files. > IPCMOUSE 5 or 6 have no effect sadly, both in the Boot and at the > command line ! > mouse serial connected to the SuperHermes from what i can see. > Again, check the mouse connector. Ser4 & 6 are on the underside of the SHermes PCB, marked P9 & P3 (both 4 pins). Ser 5 (P4/RTTY, 4pins) is on the top next to ser3 (P1, 9 pins). Ser 4,5,6 are meant for the mouse. Try the mouse direct, not via the KVM. Also check the ipcextuk_bin configuration settings with (Menu)Config_exe. Bob -- Gemaakt met Opera's revolutionaire e-mailprogramma: http://www.opera.com/mail/ _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
