Cheers bob. I now know why Flp1_ isn't working. I have connected the Floppy cable to the 'Other' SGC socket, so it is in fact currently Flp3_
I will plus into the other socket tomorrow. CDROM_bin and ATAPIqub_bin are both on win1_ so I've changed my boot and now get upon startup. ATAPI extensions thing V0.20 for QUBIDE (c) 2001 Thiery GODEFROY. CD-ROM device driver V0.06 (c) 2001 Thiery GODEFROY. Which is good but when i do dir cdr1_ i get 'Not implemented', which is bad. I guess i need to update something, SMSQ/E perhaps?!? Neil p.s. IPCMOUSE 5 or 6 have no effect sadly, both in the Boot and at the command line ! mouse serial connected to the SuperHermes from what i can see. >>> [EMAIL PROTECTED] 23 January 2007 16:10 >>> Neil Riley schreef <[EMAIL PROTECTED]>: > LRESPR win1_ipcextuk_bin > This is the SHermes driver, when loaded a prompt should be seen. Where have you connected your mouse? Add a line or direct command: IPCMOUSE n, where n is the serial port for the mouse (5 or 6). > no mention of the 3.5" DISK DRIVE. > The floppy's never show up with a prompt. The flp1_ light should come up when F1/F2 is pressed. If not, check the cable and drive select settings. When you have it working make a simple Boot floppy: TK2_EXT: LRESPR flp1_ipcextuk_bin This way you will always have access to your system. > Qubide led. > The Qubide led connects to the 2 pins between the 40 way HDD connector and the PCB-through connector, near the PCB edge. Minus is closest to the edge. > This HOT key... so how would i trigger this and also, when theAurora > finished booting, i was aware of a few icons on screen with apadlock but > the mouse seems to have little effect. > The HOT_GO has started the Hotkey job. Check the HOT_LOAD lines for the characters to press with ALT. The padlock is shown when the buttons are set up, the last is the current job. Move the lock to the Basic window (cursor or mouse) and press Space or mouse. > also, how can i access the CD ? > You need to LRESPR 2 files: ATAPIQUB_BIN & CDROM_BIN. Both are in the public domain. Getting there, Bob -- Gemaakt met Opera's revolutionaire e-mailprogramma: http://www.opera.com/mail/ _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm *********************************************************************************** The contents of this email are confidential to the intended recipient. It may not be disclosed to or used by anyone other than the addressee, nor may it be copied in any way. If received in error, please contact the company on 01793-715380, then delete it from your system. Please note neither the company nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any) for viruses. No contract may be concluded on behalf of the company by means of email communications. BC Services (UK) Limited (trading as Boxclever), Technology House, Ampthill Road, Bedford, MK42 9QQ. Registered No. 5290544 England www.boxclever.co.uk *********************************************************************************** _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
