On Tue, Feb 15, 2011 at 7:31 AM, Bob Spelten <[email protected]> wrote: > On 14 Feb 2011, at 19:38, Plastic wrote: > > ... I would be happy to design and manufacture a limited run of these >> >> adaptors to use CR2032s so we can all have our battery backed clocks >> working again. >> > Make sure the total height does not exceed the original. > I had to shave of the legs of the holder to make it fit the QL without > contacting the metal keyboard plate. >
There is 7mm of clearance from the top of the ICs below the battery to the top of the tallest component., Most holders are 7.5mm tall. I have selected a surface mount, low profile holder that, with the PCB thickness, will not be taller than the surrounding components - which leaves 1.2mm of clearance. Hope this helps... Dave _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
