Il giorno 15/feb/11, alle ore 00:06, Plastic ha scritto:
I didn't notice it was socketed and thought it was soldered to the
board and
those were spacers *laughs*
I will have to locate some pins or leads that fit the socket, but
yes, Rich
is correct: no soldering required.
I am prepared to commit to making a batch of 100 if I see any other
signs of
interest in addition to Rich's observation...
Dave
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I would take two.
I currently have a SGC whith the original battery still working and a
GC whith a CR 2032 put in a socket connected by two flying wires
soldered on it and inserted in + and - pins on the GC battery socket.
It works, but a more reliable and stable solution is welcome.
Vittorio
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
