Hi I have just purchased an unfinished H4 based on a cvh 1600 xr2i. The wiring on the ignition side is completly dead no igniton warning light on the dash bulb ok. A lot of the wires from the battery, to the altenator are just hanging loose in the engine bay, as are a lot of earth leads.
I can't tell where any of these wires go. I can't make head nor tail, of the diagram in the workshop manual so was hoping someone could help? maybe photo's of the wires showing where they start and finish? or a colour coded diagram of the ignition system? Also the central locking/electric windows and the horn don't work! I've checked all the fuses and they seem ok. Hope someone can help Newbie --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
