hi from what ive been told / worked out for myself the 2 types are interchangeable though I would double check the driveshaft retaining method first - either 6 cap head screws or a snap ring on the end of the splined inner cv joint that engages within the diff and try to match them up
it would appear that the 1.3 - 1.4 had the cap head bolts and the intermediate shaft support and the 1.1 ohv and 1.6 cvh had the straight shaft, but as mentioned the shaft support can be unbolted good luck -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
