Thanks guys... Not looking forward to the experience :-( What I need is a 19 century chimney sweep. Anyone got a smallish nephew they don't need for a while???
I think the mounting box is on rivnuts so that wouldn't be too much of a problem. I may just put it off for a while... Like I do until I can build up some enthusiasm... Sent from my iPad On 12 Aug 2011, at 15:46, Sean <[email protected]> wrote: > I had to replace my master cylinder a couple of years ago, the thing > is.... > . > . > . > . > . > . > . > i honestly can't remember how i done it ;) > > Sorry no help I know, think I looked through the build manual and > worked it out from there. > > Enjoy the footwell. > > > > On Aug 12, 2:11 pm, Ian Harrison <[email protected]> wrote: >> Hi gang, look like my master cylinder is on the way out with the seals >> starting to give up on one circuit. >> >> Now obviously the M/C has to come off, but can any builders advise of the >> best way to do this? >> >> Is it easiest just to undo the big bolts and remove, or is it easier to >> remove the box it is mounted on? >> >> The only reason I ask is I am trying to avoid having to wedge myself down >> the footwell again... I thing I hate with a passion.... >> >> Cheers >> Ian > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
