Just to answer a couple of the other questions in my xtreme the box is held on with bolts that go into rivnuts.. So no worries there.
The big mc bolts just go through the box. You do need a spanner on one side and a extension with a flexi bit to get on the inside bolt heads. The bolts will fall out into the footwell and you can get tywm back in pretty easily. It is a 15min job.. Take the box off and hopefully all will become clear :) On 15/08/2011, Chris Young <[email protected]> wrote: > I have been doing this quite a lot recently as my clutch cable went > and I've been trying out different tweaks to the clutch pedal and > different quadrants. > > I would suggest removing the box. You can then get to the other side > of the big bolts. Just be mindful that doing it this way you end up > having to bend the brake line as you pull the box away.. > > Remove the brake light switch first.. The only part of the job in the > footwell, but at least it can be done by leaning in rather than > getting in :) > > Good luck > > Chris > > On 12/08/2011, Ian Harrison <[email protected]> wrote: >> Hi gang, look like my master cylinder is on the way out with the seals >> starting to give up on one circuit. >> >> Now obviously the M/C has to come off, but can any builders advise of the >> best way to do this? >> >> Is it easiest just to undo the big bolts and remove, or is it easier to >> remove the box it is mounted on? >> >> The only reason I ask is I am trying to avoid having to wedge myself down >> the footwell again... I thing I hate with a passion.... >> >> Cheers >> Ian >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Quantum Owners Group" group. >> To post to this group, send email to [email protected] >> To unsubscribe from this group, send email to >> [email protected] >> For more options, visit this group at >> http://groups.google.com/group/quantumowners?hl=en >> >> IMPORTANT NOTE: All information presented herewith is provided on an "As >> Is" >> basis, without warranty or the implication thereof. Neither the Quantum >> Owners Club nor the individuals associated with the Quantum Owners Club >> or >> in the preparation of the above information shall have any liability to >> any >> person or entity with respect to liability, loss, or damage caused or >> alleged to be caused directly or indirectly by the instructions contained >> within this or related message(s). > > -- > Sent from my mobile device > -- Sent from my mobile device -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
