Hi Jim attached photo (soz it's not the best) of the coil pack and lead. I've found that although the plug seems to connect positively, the latch on the coil pack slopes both to allow the plug to push on, and instead of a "right angle" in slopes for the plug to be "pulled" off without really having to depress the spring to release it. The coil pack I bought for the car is the same as the one that's on the car, but I did notice that the one that's on has the model details in the ubiquitous yellow scrap yard marker, so it's not the original. Looking at the mounting for the coil pack etc, it does seem to be the right one, but having only really seen the one I could be wrong. As previous post, I'm going to do a deep check of the wiring and plug tomorrow - I'll post to let you know how it goes. Thanks Steve
can't post the pic, too large! -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
