Seem to recall something similar with early FX inverters.. Don’t recall the particulars but it might have had something to do with loosing their mind before shutting down.. maybe a shorted output.
Sent from my iPhone On Dec 11, 2020, at 9:16 PM, William Miller <[email protected]> wrote: Jon: In the deep recess of my memory I recall this error code with FX inverters. It was caused by a stuck transfer relay. You might open the inverter cover and look for signs of smoke or arcing in the relay. Good luck! Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com<http://www.millersolar.com/> CA Lic. 773985 From: RE-wrenches [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Jon Siegenthaler Sent: Friday, December 11, 2020 6:01 PM To: [email protected]<mailto:[email protected]> Subject: [RE-wrenches] Outback AC Backfeed Error Hey wrenches, I have a client who has a couple of the Radian 8048's and has an error code of "AC Backfeed Error GS-1". Looking at the manual it states that "Usually indicates another AC power source (out of phase with the inverter) was connected to the unit’s AC output. Can also occur if an out-of-phase AC source is connected to the inverter’s AC input." However when this happened the generator wasn't running and it's an off grid system. Is there a way that the master is looking to the slave as another power source? The system had been running fine this week, auto running the generator early morning and shutting down on its own. Anyone seen something like this before? Thanks, Jon Siegenthaler _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
