Wrenches Might want to look at the hub and data cables to the inverters, bad or poor connections can effect phases of the inverters, l have seen this manifest it self with errors like inverter firmware issues that in fact are bogus. The OEM cat 5 cables are not shielded and that causes problem when they are wrapped all around in a box. Easy to test with meters, how many times have you just rebooted or unplugged something for it all to get better. Anyway thats just one of many great ideas Jerry NABCEP Inspector NABCEP Installer
On Fri, Dec 11, 2020, 6:01 PM Jon Siegenthaler <[email protected]> wrote: > Hey wrenches, > > I have a client who has a couple of the Radian 8048's and has an error > code of "AC Backfeed Error GS-1". Looking at the manual it states that > "Usually indicates another AC power source (out of phase with the inverter) > was connected to the unit’s AC output. Can also occur if an out-of-phase AC > source is connected to the inverter’s AC input." > > However when this happened the generator wasn't running and it's an off > grid system. Is there a way that the master is looking to the slave as > another power source? The system had been running fine this week, auto > running the generator early morning and shutting down on its own. > > Anyone seen something like this before? Thanks, > > Jon Siegenthaler > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
