You said both, it will go into absorb for an hour only and it will net go into absorb. Which one please?
Is there an AGS? Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail [email protected] text 209 813 0060 On Fri, 08 Jan 2021 13:33:56 -0500, [email protected] wrote: > Hello Wrenches, > > An off grid, Radian / Mate 3 system we set up some years back has worked > flawlessly. The client is now reporting that his system will only go > into absorption charge for 1 hour per calendar day. The setting was > previously to absorb for 2 hours. > > He has tried shutting off the generator and then restarting. The > inverter will connect, but not go into absorb. > > During this cloudy period, he is only able to get the batteries to about > 80 percent before he needs to leave the site for a week or so. > > I finally go through to Outback, and they think it is a Firmware > problem. As it is a long drive out, it seems worth while to run it by > the list. Does FW this seem like the issue? > > Thank you, > > Drake _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
