Same page with you Jay, as usual... Does the battery system go to absorb with solar still even if it is cloudy? Maybe a bad battery? Tis the season! Can the user go thru the set-points and make sure nothing has changed? Gen sets can do weird surges that can corrupt settings.
If he has to leave, shut down the inverter? Is that an option? It is only a week right. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsola e-mail [email protected] text 209 813 0060 On Fri, 8 Jan 2021 13:39:40 -0700, Jay <[email protected]> wrote: > Is it ags start and is it starting on volts or %, or load? > > >> On Jan 8, 2021, at 1:10 PM, Dave Angelini Offgrid Solar >> <[email protected]> wrote: >> >> You said both, it will go into absorb for an hour only and it will net >> go >> into absorb. Which one please? >> >> Is there an AGS? >> >> >> Dave Angelini Offgrid Solar >> "we go where powerlines don't" >> http://members.sti.net/offgridsolar/ >> e-mail [email protected] >> text 209 813 0060 >> >>> On Fri, 08 Jan 2021 13:33:56 -0500, [email protected] >>> wrote: >>> Hello Wrenches, >>> >>> An off grid, Radian / Mate 3 system we set up some years back has worked >> >>> flawlessly. The client is now reporting that his system will only go >>> into absorption charge for 1 hour per calendar day. The setting was >>> previously to absorb for 2 hours. >>> >>> He has tried shutting off the generator and then restarting. The >>> inverter will connect, but not go into absorb. >>> >>> During this cloudy period, he is only able to get the batteries to about >> >>> 80 percent before he needs to leave the site for a week or so. >>> >>> I finally go through to Outback, and they think it is a Firmware >>> problem. As it is a long drive out, it seems worth while to run it by >>> the list. Does FW this seem like the issue? >>> >>> Thank you, >>> >>> Drake >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try >> the other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
