Hi, This and other pre-alpha releases are not intended for end users, but only for really advanced users who want to experiment before the official version. This was discussed previously in another thread [1].
To use binaries in release, first build OpenSim. After building OpenSim the binaries in the packet must to be placed in bin directory of OpenSim. To build ModreX from the source is a different question. There are at least two different paths to build ModreX. 1) Run the prebuild under OpenSim, run the prebuild under ModularRex, open up the OpenSim solution, add the five (previously 3) projects to solution. 2) Run the prebuild under OpenSim, run nant, run the prebuild under ModularRex, run nant And to answer to your last question, it seems that the login_to_simulator XMLRPC method is not overloaded properly. To ensure that it will be overloaded 1) check that ModularRex.dll exists in your OpenSim's bin directory and that 2) "enabled = true" line exist under [realXtend] section in OpenSim.ini. [1]: http://groups.google.com/group/realxtend/browse_thread/thread/7cd38488d8bdee0c ______________________________ Mikko Pallari Server Technical Lead in RealXtend ADMINO technologies www.adminotech.com www.realxtend.org -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gustavo Alberto Navarro Bilbao Sent: 23. maaliskuuta 2009 21:41 To: [email protected] Subject: [realXtend] Re: Grab your modrex binaries here Mikko, I'm quite confused about how to use the binary you uploaded, and I suppose some users too. Where do you get? Replace the contents of the trunk? That means that when creating the solution are no longer needed enter 3 projects to the existing OpenSim solution to rebuild it? I've done it, and recompiled without errors but I can't get credentials from login XML. The authentication server show "CLIENT LOGGIN IN TO SIM: testu...@http://127.0.0.1:9000 and the opensim show: [LOGIN END]: XMLRPC login_to_simulator login mesage did not contain all the required data. Sure than I made some, or a lot, of wrong process. Thks //////////////////////////////////////////////////////////////////////////////////////// 2009/3/23 Mikko Pallari <[email protected]>: > > Ok, I have now uploaded the binaries of revision 99 to > http://forge.opensimulator.org/gf/project/modrex/frs/ > > This release works with OpenSim revisions 8814 or greater. > > And although we have made progress from last month, it still has many known > and unknown bugs. > > ______________________________ > Mikko Pallari > Server Technical Lead in RealXtend > > ADMINO technologies > www.adminotech.com > www.realxtend.org > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Gustavo Alberto Navarro Bilbao > Sent: 23. maaliskuuta 2009 13:41 > To: [email protected] > Subject: [realXtend] Re: Grab your modrex binaries here > > I've just download the bianries, here, in another machine at my job's place, > and, just you can see in the capture attached to this post, all the services, > Authentication, storage and OpenSim, works without errors. > > > I can start and test the viewer, with the 127.0.0.1 ip, but not with the > external ip, because the security's configuration of the proxy here, but the > conexion with the modrex works well. > > ************************************************************************ > 2009/3/23 Gustavo Alberto Navarro Bilbao <[email protected]>: >> Yes, I did, and in mine tests, in my local machine, works perfectly, >> without errors, compiled with the last opensim sources, the v 8822 for >> opensim and v. 99 for modrex like Paul says me, and with that the >> compilation with Visual 2008n was finished withoy errors. >> As I know, some testers had used this bianries without problems. >> >> ¿Somebody more tested it in XP? >> >> ********************************************************************** >> ******** >> >> 2009/3/23 Mikko Pallari <[email protected]>: >>> >>> The file is called: ModularRex.RexOdePlugin.dll >>> >>> ______________________________ >>> Mikko Pallari >>> Server Technical Lead in RealXtend >>> >>> ADMINO technologies >>> www.adminotech.com >>> www.realxtend.org >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] >>> On Behalf Of Ralf Haifisch >>> Sent: 23. maaliskuuta 2009 11:38 >>> To: realXtend >>> Subject: [realXtend] Re: Grab your modrex binaries here >>> >>> >>> oops... >>> >>> Alberto, you did build on Windows - according to >>> http://opensimulator.org/wiki/ModRex >>> ?? >>> >>> Mikko, how should the file be called ? maybe its just missplaced >>> somehow ? >>> Is it RexOpenDynamicsEngine.exe or .dll ?? >>> >>> >>> cheers, >>> Ralf >>> >>> On 23 Mrz., 08:27, Mikko Pallari <[email protected]> wrote: >>>> Hi, >>>> >>>> It seems that the zip file is missing the physics engine. It should be >>>> located in bin/Physics. >>>> >>>> ______________________________ >>>> Mikko Pallari >>>> Server Technical Lead in RealXtend >>>> >>>> ADMINO technologieswww.adminotech.comwww.realxtend.org >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: [email protected] [mailto:[email protected]] >>>> On Behalf Of Ralf Haifisch >>>> Sent: 23. maaliskuuta 2009 0:53 >>>> To: realXtend >>>> Subject: [realXtend] Re: Grab your modrex binaries here >>>> >>>> trying to run it on Linux: >>>> >>>> i had to reachive it ... when i directly downloaded to linux the >>>> files did include the path in their name and the folder where empty >>>> ?? never seen that. did download to windows , unzip , rezip >>>> (standard zip on vista), upload to linux - all fine. >>>> >>>> the i did unzip on linux and configure the store, auth and opensim >>>> for my setting. >>>> store and auth are cummin up well. >>>> >>>> opensim dies with: >>>> >>>> 22:35:56 - [PHYSICS]: creating meshing engine ZeroMesher >>>> 22:35:56 - [PHYSICS]: couldn't find physicsEngine: >>>> RexOpenDynamicsEngine >>>> OpenSim threw an exception: >>>> System.ArgumentException: couldn't find physicsEngine: >>>> RexOpenDynamicsEngine >>>> at >>>> OpenSim.Region.Physics.Manager.PhysicsPluginManager.GetPhysicsScene >>>> (System.String physEngineName, System.String meshEngineName, >>>> IConfigSource config, System.String regionName) [0x00000] >>>> at >>>> OpenSim.Region.ClientStack.RegionApplicationBase.GetPhysicsScene >>>> (System.String engine, System.String meshEngine, IConfigSource >>>> config, System.String osSceneIdentifier) [0x00000] >>>> at OpenSim.OpenSimBase.GetPhysicsScene (System.String >>>> osSceneIdentifier) [0x00000] >>>> at OpenSim.OpenSimBase.SetupScene (OpenSim.Framework.RegionInfo >>>> regionInfo, Int32 proxyOffset, IConfigSource configSource, >>>> IClientNetworkServer& clientServer) [0x00000] >>>> at OpenSim.OpenSimBase.CreateRegion (OpenSim.Framework.RegionInfo >>>> regionInfo, Boolean portadd_flag, Boolean do_post_init, IScene& >>>> mscene) [0x00000] >>>> at OpenSim.OpenSimBase.CreateRegion (OpenSim.Framework.RegionInfo >>>> regionInfo, Boolean portadd_flag, IScene& scene) [0x00000] >>>> at >>>> OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitial >>>> ise >>>> () [0x00000] >>>> at OpenSim.OpenSimBase.StartupSpecific () [0x00000] >>>> at OpenSim.OpenSim.StartupSpecific () [0x00000] >>>> at OpenSim.Framework.Servers.BaseOpenSimServer.Startup () [0x00000] >>>> at OpenSim.Application.Main (System.String[] args) [0x00000] >>>> at OpenSim._32BitLaunch.Program.Main (System.String[] args) >>>> [0x00000] >>>> >>>> Application will now terminate! >>>> >>>> so - that is the same error i get on my own compilation. >>>> >>>> where should i find "RexOpenDynamicsEngine" ? >>>> >>>> in the directory cotaining the opensim executables and config, the >>>> only Rex* is "RexObjects.db". >>>> >>>> next thing it thougth was, that i did miss something or something >>>> was missing at the compile incrutions on opensimulator.org >>>> >>>> i did unzip to a fresh directory and run the OpenSimulator.32Launch. >>>> >>>> it dies with the error: >>>> >>>> 22:48:30 - [VOICECHAT]: Connection handler started... >>>> 22:48:30 - [NHIBERNATE]: Initializing NHibernateRexObjectData >>>> OpenSim threw an exception: >>>> System.DllNotFoundException: System.Data.SQLite.DLL >>>> at (wrapper managed-to-native) >>>> System.Data.SQLite.UnsafeNativeMethods:sqlite3_open_interop (byte >>>> [],intptr&) >>>> at System.Data.SQLite.SQLite3.Open (System.String strFilename) >>>> [0x00000] >>>> at System.Data.SQLite.SQLiteConnection.Open () [0x00000] >>>> at NHibernate.Connection.DriverConnectionProvider.GetConnection () >>>> [0x00000] >>>> at OpenSim.Data.NHibernate.NHibernateManager.RunMigration >>>> (System.String dialect, System.Reflection.Assembly assembly, >>>> System.String store) [0x00000] >>>> at OpenSim.Data.NHibernate.NHibernateManager..ctor (System.String >>>> connect, System.String store, System.Reflection.Assembly assembly) >>>> [0x00000] >>>> at ModularRex.NHibernate.NHibernateRexAssetData.Initialise >>>> (System.String connect) [0x00000] >>>> at ModularRex.RexParts.ModRexMediaURL.PostInitialise () [0x00000] >>>> at OpenSim.Region.Framework.ModuleLoader.PostInitialise () >>>> [0x00000] >>>> at >>>> OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitial >>>> ise >>>> () [0x00000] >>>> at OpenSim.OpenSimBase.StartupSpecific () [0x00000] >>>> at OpenSim.OpenSim.StartupSpecific () [0x00000] >>>> at OpenSim.Framework.Servers.BaseOpenSimServer.Startup () [0x00000] >>>> at OpenSim.Application.Main (System.String[] args) [0x00000] >>>> at OpenSim._32BitLaunch.Program.Main (System.String[] args) >>>> [0x00000] >>>> >>>> Application will now terminate! >>>> >>>> i look into the OpnSim.ini , and the only "rex" found in the file is: >>>> >>>> db_connectionstring = "SQLiteDialect;SQLite20Driver;Data >>>> Source=RexObjects.db;Version=3" >>>> >>>> i would expect more "rex" lines according >>>> tohttp://opensimulator.org/wiki/ModRex, >>>> but have no clue what the "SQLiteDialect" does mean ?!? >>>> >>>> running: >>>> >>>> Mono JIT compiler version 2.0.1 (tarball) Copyright (C) 2002-2008 >>>> Novell, Inc and Contributors.www.mono-project.com >>>> TLS: __thread >>>> GC: Included Boehm (with typed GC) >>>> SIGSEGV: altstack >>>> Notifications: epoll >>>> Architecture: amd64 >>>> Disabled: none >>>> >>>> is this incompatible ? >>>> >>>> any idea where to dig ? >>>> >>>> did anyone run this on linux ? >>>> >>>> linux amd64 ? >>>> >>>> linux amd64 mono 2.x ? >>>> >>>> cheers, >>>> Ralf >>>> >>>> On 22 Mrz., 11:33, Jani Pirkola <[email protected]> wrote: >>>> > Hi, >>>> >>>> > Albert from Hispagrid uploaded modrex binary with all the >>>> > necessary servers (opensim + realXtend authentication+avatar >>>> > storage) and instructions to CTN web site. Grab your copy here (tested >>>> > in Windows): >>>> > realXtend Modrex status update >>>> > <http://www.cybertechnews.org/?p=1290>Note >>>> > that modrex is still pre-alpha and may not work as expected. >>>> >>>> > Modrex is a DLL that provides the realxtend enhancements to an >>>> > Opensim server; voice, free-form avatar, 3D meshes, shadows, >>>> > OGRE3D rendering, skype calls, and more. (realXtend viewer is >>>> > needed too!) >>>> >>>> > Best regards, >>>> > Jani >>>> >>>> > PS: check also tutorials how to do things in >>>> > realXtend:http://wiki.realxtend.org >>>> > and >>>> > this:http://wiki.realxtend.org/index.php/Content_Community_Contrib >>>> > uted_Tut...- Zitierten Text ausblenden - >>>> >>>> - Zitierten Text anzeigen - >>> >>> >>> >> >>> >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
