Whatever equipment you do use, be *SURE* you have it in CTCSS access (Not carrier squelch). There are only four 10M FM repeater channels, and even during this low part of the sunspot cycle, they're unusable due to the numbers of repeaters on each of the four channels. They ID on top of each other, drop in and out as the signals take fades, talk to themselves spewing out time, temperature, elevation, club names, etc. etc. A real mess. If we could select the one we want to use with the appropriate tone, (like we used to be able to do), it would be a good thing.
Now Six meters, there's a good place for a low-band repeater system. Lots more channels available. Larry Original Message: ----------------- From: jhoonbee [EMAIL PROTECTED] Date: Tue, 30 Nov 2004 06:17:19 -0000 To: [email protected] Subject: [Repeater-Builder] ten meter repeater setups Hello to the group, I would like to have some information on what type of equiptment that I would need to set up a 10 M repeater in the near future. I know that it will have to be a split site and most likely have a UHF carrier system or a dedicated phone line between sites, but what Mod#s of let say GE master2 would I need or is there a better solution to the idea. I know its low in the Sun Spot numbers now but it wont be forever. Thank you for all of your support, Danny Yahoo! Groups Links -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

