Hi,
Here's the deal. I have two sites...Site one is where my 440 hub
repeater is located. Site two is where I'm planning to put a 220
repeater. The distance between the two is about 20-30 yds.
I need to find a way to link the two together. Doing it on 440 is out
for several reasons. I could use 900 with a couple of GTX900s or
similiar but that seems to be a total waste not to mention would cost
$250-$300. Seems like there should be an alternative to spending that
kind of money. I also need this to work without attracting a lot of
attention, ie...putting up antennas outside. The radios would need to
be able to do CTCSS or DCS.
Someone suggested using telemetry radios. Anyone have any experience
with those? Someone else said I might be able to do it with hts on low
power. I have been thinking about 1.2 GHz but can't locate anything
that would work.
Your suggestions?
Thanks
Mike K4IJ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
