How about interconnect via wire? Neil - WA6KLA
---- Original Message ---- From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Linking Suggestions Please Date: Mon, 20 Mar 2006 00:45:07 -0000 >Hi, >Here's the deal. I have two sites...Site one is where my 440 hub >repeater is located. Site two is where I'm planning to put a 220 >repeater. The distance between the two is about 20-30 yds. >I need to find a way to link the two together. Doing it on 440 is out > >for several reasons. I could use 900 with a couple of GTX900s or >similiar but that seems to be a total waste not to mention would cost > >$250-$300. Seems like there should be an alternative to spending that > >kind of money. I also need this to work without attracting a lot of >attention, ie...putting up antennas outside. The radios would need to > >be able to do CTCSS or DCS. > >Someone suggested using telemetry radios. Anyone have any experience >with those? Someone else said I might be able to do it with hts on >low >power. I have been thinking about 1.2 GHz but can't locate anything >that would work. > >Your suggestions? > >Thanks >Mike K4IJ > > > > > > > > > >Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/