>>> Yes I have to add a tee for the bottom half.
That's your problem. You need the specific harness for a 4-bay antenna.
It will have the connector you connect to, which will split into two
paths, then further down each one will split again.
"Tee" connectors will cut the impedance in half. If you have to add one,
you are using the wrong harness.
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
