Alright for all those that think I'm an idiot, it's true.... I am! I went back up to the repeater site and did some testing. I did find that there was some water in the coax. I blew it out and re-sealed the connectors. Now I am back up to 22-25 watts with a 1.1 match on the 4 antenna's. So I am still losing 20 watts somewhere???
I tried the vertical full wave antenna I had laying at the site and it also gives me 25 watts out. So I am losing almost half through the duplexers. This is strange to me, mind you I am losing about 3db in the duplexers so that is half. --- In [email protected], "Jim B." <[EMAIL PROTECTED]> wrote: > > > >>> Yes I have to add a tee for the bottom half. > > That's your problem. You need the specific harness for a 4-bay antenna. > It will have the connector you connect to, which will split into two > paths, then further down each one will split again. > "Tee" connectors will cut the impedance in half. If you have to add one, > you are using the wrong harness. > -- > Jim Barbour > WD8CHL > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
